EverGlow NA, Inc. - Extruded Aluminum Stair Nosings & Treads: Renovation Stair Tread for Existing Facilities

View from above

Item No: 90.US0500

Contact EverGlow

Toll Free: (1) 866-744-4706
Telephone: (1) 704-841-2580
Email Us: This email address is being protected from spambots. You need JavaScript enabled to view it.

Back to: Extruded Aluminum Stair Nosings & Treads

We take orders over the phone. We accept all major credit/debit cards. Click here for Terms and Conditions.

High quality photoluminescent (glow-in-the dark) slip resistant stair tread that meets the requirements of NYC Local Law 26, current NYC building and fire codes, current IBC & IFC model codes and all local building & fire codes across the United States. These treads are used for exit path markings when finding pathways in the dark is a necessity. The use of a heat treated corrosion resistant aluminum substrate with a nearly diamond hard aluminum oxide filler assures long tread life under heavy pedestrian traffic. These safety surfaces have easy maintenance features and ensure the greatest protection from falls and injuries.

Features:

Mill finish extruded aluminum base - abrasive filler
Lengths to order - up to 8 feet
Bright, long lasting photoluminescent marker
Smooth easy to clean
High content of aluminum oxide abrasive
Clean architectural lines
Meets or exceeds NYC RS 6-1 and current NYC building and fire codes
Meets or exceeds current IBC & IFC (model) codes, and all current local building and fire codes across the US
Meets or exceeds NFPA 101 (2012 edition) and all current editions of NFPA 101 - Life Safety Code
Meets or exceeds the luminance requirements of ASTM E2072 and E2073
Meets or exceeds the luminance requirements of UL1994 and UL S572 (Canada)
Coefficient of friction (slip resistance) meets or exceeds OSHA standard 1910.22, ASTM standards and military specifications

Specification:

EverGlow 90.US0500, Renovation Stair Tread for interior and exterior stairs.
Type of anchor shall be specified.
Compliant with all requirements of New York City local law 26 (2004) RS 6-1 and RS 6-1A, viz., flammability (ASTM D635-2003), toxicity (SMP 800C), washability (ASTM 4828-1994), radioactivity (ASTM D 3684-2004) and brightness (ISO 17398-2004).
Meets or exceeds current NYC building and fire codes.
Meets or exceeds current IBC & IFC (model) codes, and all current local building and fire codes across the US.
Meets or exceeds NFPA 101 (2012 edition) and all current editions of NFPA 101 - Life Safety Code.
Meets or exceeds the luminance requirements of ASTM E2072 and E2073.
Meets or exceeds the luminance requirements of UL1994 and UL S572 (Canada).
Tread base shall be type 6063-T5 extruded aluminum.
Base area has integrally designed channels filled with not less than 65% virgin aluminum oxide slip resistant abrasive filler in contrasting colors.
Photoluminescent front groove to be filled with 16% minimum resilient type epoxy filler for improved clean ability. Remaining grooves filled with slip resistant filler containing not less than 65% virgin grain Aluminum Oxide/Silicon Carbide abrasive.
Photoluminescent epoxy filler (free of hazardous and radioactive substances) shall extend uniformly throughout the filler.
Treads shall terminate not more than 2" from ends of steps.
Coefficient of friction (slip resistance) meets or exceeds OSHA standard 1910.22, ASTM standards and military specifications.
Smooth photoluminescent glow area with excellent cleanability. Highest possible score of 10 on the soil expansion index (ASTM D4829) test.