|
|
 |
 |
EverGlow Photoluminescent Exit Signs Evaluated & Tested to UL924
| |

90.8924R-2-F-B
|
|
EverGlow Photoluminescent Exit Signs (tested & listed by ETL to meet the UL924 performance standard) are
available with a red or green background. A black background is available as a special order.
The glow letters are fully legible for 90 minutes after the failure of normal lighting, according to code.
These signs have a visibility rating of 75 feet.
EverGlow photoluminescent Exit Signs can be used with or without an architectural frame & mounting bracket.
Two signs with a frame & bracket can be used as a double sided sign.
The signs, frames & brackets are aluminum; all mounting hardware (included) are stainless steel or other non-corrosive fastener.
Two glow chevrons are included with each sign for use as directional markers.
EverGlow Photoluminescent Exit Signs Consume ZERO Energy & are Vinyl FREE!
|
| |
• Maximum Reliability & Effectiveness
• No Electricity, No Batteries, No Lamps
• Durable, will Last for Decades
• Explosion Proof Design
• No Toxic or Radioactive Components
• Easy Installation
• Low Maintenance
Code Compliant:
• NFPA 101 - Life Safety Code
• NFPA 1 & 5000
• IBC & IFC
EverGlow Photoluminescent Exit Signs are tested & evaluated according to UL924 and need ambient fluorescent lighting
of at least 5 foot-candles on the sign face at all times the building is occupied.
|
|

90.8924G-2-F-B
|
| |
EverGlow photoluminescent exit signs are excellent for use in all facilities- factories, office buildings, schools, hospitals & hotels.
With approval by the Authority Having Jurisdiction (AHJ) in your locale, these signs can be used as a replacement
for "over the door" electrically powered exit signs or as floor level exit signs. EverGlow signs
are an acceptable "alternate material" in most jurisdictions & those that have not yet adopted the recent code language.
The use of alternate materials, design & methods of construction and equipment is clearly provided for in the IBC, Chapter 1.
The resources at the bottom of this page will give you the information you need to present to the building inspector
or his supervisor. Please let us know if you need any additional documentation.
EverGlow aluminum signs feature a durable unitized single layer construction.
We use no plastic in our design and the thin, solid construction features a vandal resistant, non-glare ceramic surface.
Fail safe supplemental emergency lighting that pays for itself with savings on installation & maintenance labor,
electrical power, no replacement batteries or bulbs!

Tough, School Proven Design
| |

Installed as Required by Many Jurisdictions
Emergency Lighting & Exit Signs are typically the most neglected life safety components in every building.
Please follow these links to articles which describe specific and common problems affecting reliability and
effectiveness- improper installation and inadequate maintenance- with electrical exit signs.
HOW GOOD IS YOUR EMERGENCY LIGHTING?
Drew Marchetti, Buildings Magazine, Stamats Business Media, November 2001.
WHERE THERE'S SMOKE... THERE SHOULD HAVE BEEN A SAFETY REVIEW.
Lanny Berke. Machine Design, Penton Media, September 2008
Energy efficient overhead lighting can easily provide 5 ft-candles of illumination for EverGlow photoluminescent exit signs.
A single fluorescent fixture near the exit door & sign can provide enough lighting to "read a newspaper at
arm's length"; considered by many inspectors to be a minimum of 5 ft-candles of illumination.
|
| |
EverGlow Photoluminescent Exit Signs - 3D Graphic
Rotate our exit sign graphic and notice the thin profile and clean design for ceiling or wall mounting.
The mounting bracket can be installed on either end or on the top of the frame as necessary for your installation.
Then view our installation photographs below and our construction drawings at the bottom of the page.
Download a Java Add-on to View this 3D Graphic.
|
| |
INSTALLATIONS

Wall Mount Bracket & EverGlow Photoluminescent Exit Sign
|

EverGlow Photoluminescent Exit Sign Mounted on the Wall

Ceiling Mounted EverGlow Photoluminescent Exit Sign
|
| |
INFORMATION ABOUT EVERGLOW PHOTOLUMINESCENT EXIT SIGNS TESTED & EVALUATED TO THE UL924 PERFORMANCE STANDARD.
Data Sheet for EverGlow Photoluminescent Exit Signs Evaluated to UL924.
Installation & Assembly Instructions for EverGlow Photoluminescent Exit Signs Evaluated to UL924.
3-Part Specifications for EverGlow Photoluminescent Exit Signs Evaluated to UL924.
(MasterFormat 2004, MS Word) (MasterFormat 1995, MS Word)
Construction Drawings for EverGlow Photoluminescent Exit Signs Evaluated to UL924.
(PDF)
(DWG)
(DXF)
BIM Objects for EverGlow Photoluminescent Exit Signs Evaluated to UL924.
REVIT
(Ceiling Mounted EverGlow Exit Signs)
(Wall Mounted EverGlow Exit Signs)
ArchiCAD
(Ceiling & Wall Mounted EverGlow Exit Signs)
Save Money by Replacing Electrical Exit Signs with EverGlow Photoluminescent Exit Signs Evaluated to UL924.
How to Buy Energy Efficient Exit Signs, US Department of Energy.
Cost Comparison for Different Types of Exit Signs.
ENERGY STAR Savings Calculator for Different Types of Exit Signs.
INFORMATION ABOUT PHOTOLUMINESCENT EXIT SIGNS - Replace electrical & radioactive exit signs in most jurisdictions.
Recent Model Code Changes for Approved Exit Signs - IBC, IFC, NFPA 101. 2009.
Recent Code Changes Requiring ALL Exit Signs be Listed in Accordance with the UL924 Performance Standard.
Code Interpretation by the California State Fire Marshal.
OSHA Factsheet - Requirements for Emergency Exit Routes.
OSHA Evacuation Plans & Procedures - Exit Route Demonstration.
US Dept. of Labor, 29 CFR- Maintenance, Safeguards, & Operational Features for Exit Routes.
US Dept. of Defense, Unified Facilities Criteria 3-600-01.
DSIRE - Database of State Incentives for Renewables and Energy Efficiency
Governor of North Carolina Signs Legislation, Senate Bill 1946, Recommending the use of Photoluminescent Exit Signs (instead of energy consuming electrical exit signs) when Permitted by the State Building Code.
|
|